Origo™ Tig 4300iw AC/DC, TA24
• Designed for quality TIG-welding in all types of material.
• QWave™ – enables AC welding with high arc stability and low noise.
• AC Frequency and Balance control – Optimises weld pool
• DC Pulsed TIG welding – easy control of heat input and the weld pool.
• ESAB LogicPump – ELP, automatic start of the cooling unit by connection
of a liquid-cooled torch
• Energy save mode – fan and pump on demand
• ESAB 2-program function – possibility to pre-program and change program
during actual welding.
• Easy to use – All welding parameters presented in an easy to understand
panel.
• MMA welding in AC and DC mode – Hot start, Arc force, and polarity
switch (DC).
.
Origo™ Tig 4300iw AC/DC
Mains supply, V/Hz 400/3
Fuse, slow, A 25
Mains cable, Ø mm2 4×4
Max output at 40% duty cycle, TIG, A/V 430/27.2
Max output at 60% duty cycle, TIG, A/V 400/26
Max output at 100% duty cycle, TIG, A/V 315/22.6
Slope up, s 0-10
Slope down, s 0-10
Gas pre-flow, s 0-10
Gas post-flow, s 0-25
Open circuit voltage (VRD off/on), V 60/<35
Setting range TIG AC/DC 4-430
Setting range MMA 16-430
Weight, kg 95
المراجعات
لا توجد مراجعات بعد.