سلك شربون (Carbon Arc Gouging Rod)

CARBON GOUGING ROD  COPPERCLAD ELECTRODE / CARBON ARC GOUGING ROD

• Applications – Fabrication / Maintenance / Farms / Repair Shops
• Current Type – D.C. (Direct Current)
• Operating Polarity – DCEP (Direct Current Electrode Positive) – Reverse Polarity
• Electrode Size -4mm-20mm *  305mm/355mm/400mm/455mm
• Amperage Capacity – 300 – 400 amps
• Pieces per Carton – 50 pieces/ Customized/ OEM LABELLING

I, Overview
The carbon arc air gouging is to take the carbon rod as the electrode, use the high temperature generated by the carbon arc to melt the metal to be planed, and then blow off the molten liquid metal through the movement of the carbon arc gun, the short arc operation of the carbon rod, and the compressed air effect of the carbon arc gun nozzle to plane out a groove to achieve the purpose of gouging. Carbon arc gas cutting is to cut metal materials with carbon arc air gouging, that is, thin materials can be cut with one air gouging, and thick materials can be cut with multiple air gouging.

2}  Characteristics of carbon arc air gouging

1. The carbon arc air gouging is much more efficient than the air shovel. It is suitable for working in all positions, especially in the elevation and vertical positions!
2. It is easy to observe and find all kinds of defects in time in the process of cleaning welding root and reverse repair welding seam planing.
3. The carbon arc air gouging can be used in narrow positions and in places where it is difficult to use other planing tools. It is flexible and convenient, and the quality is guaranteed.
4. Carbon arc air gouging can be used to plane and cut some metals that cannot be cut by oxygen acetylene, such as cast iron, stainless steel and non-ferrous metals.
5. The diameter of carbon rod is generally 6-30mm, and the cutting seam is wide, which is a bit wasteful; And narrow slots and slots cannot be realized.
6. When cutting some metal materials, it will cause carburization in the heat affected zone and increase the quenching and hardening sound at the cutting groove.
7. The cost of DC power supply is high.
8. A large amount of smoke and dust will be produced in the process of planing and cutting, especially when working in a place with poor ventilation, which will cause certain damage to the operator.

 Caution:

•   Electrodes must be kept dry. Wet electrodes can flake, or splinter and are dangerous. If electrodes become wet, bake at 300°F for 10 hours before using.