TECHNICAL DATA
GENERAL DATA
| Mains voltage | 230V |
|---|---|
| Mains frequency | 50-60Hz |
| Welding current min. | 10 A |
| Welding current max. | 150 A |
| Open-circuit voltage | 96 V |
| Degree of protection | IP23 |
|
Length
|
365 mm |
|
Width
|
130 mm |
|
Height
|
285 mm |
| Weight | 6,5 kg |
| Welding current / Duty cycle [10min/40°C] | 150A / 35% |
|---|---|
| Welding current / Duty cycle [10min/40°C] | 110A / 60% |
| Welding current / Duty cycle [10min/40°C] | 90A / 100% |
FUNCTIONS
SOFTSTART
The SoftStart function ensures a stable arc at the start of welding and was specially developed for electrodes that are welded with a low welding current (basic electrodes).
ANTI-STICK
If a short circuit occurs that causes the electrode to stick during MMA welding, the power source is switched off immediately. This prevents the electrode from burning out.
HOTSTART
To make the electrode easier to ignite, the current at the power source is increased for a fraction of a second during ignition. The HotStart function was specially developed for welding with rutile and Cel electrodes.
.
Brochure TransPocket 150/180
.
Brochure TransPocket 150/180
المراجعات
لا توجد مراجعات بعد.