Core wire alloyed electrode with rutile-basic coating for joints between dissimilar steels, steels that are hard to weld and 14% Mn steels. Well suited for tough intermediate layers in case of hardfacing. Properties of the weld metal: suitable for strain-hardening, very good cavitation resistance, crack resistant, resistant to thermal shock, resistant to scaling up to +850°C, little tendency to sigma-phase embrittlement above 500°C. Heat treatment is possible. Consultation with the manufacturer is recommended for operating temperatures above +650°C. Exceptional toughness of the weld metal even at high dilution levels with hard-to-weld steels or when subject to thermal shock. Cryogenic down to -100°C. Stable arc even with AC power.

حدد أحد خيارات المنتج والكمية المطلوبة ثم ضف إلى قائمة مشترياتك , سوف يتم الرد عليكم بعرض سعر فى أقرب وقت.
رمز المنتج: غير محدد التصنيف: الوسم:

Typical Composition of all-weld Metal

Mechanical Properties of all-weld Metal

Operating Data

Base Materials

high-strength, unalloyed and alloyed structural, quenched and tempered and armour steels among themselves or among each other; unalloyed and alloyed boiler or structural steels with high-alloyed Cr and Cr-Ni steels; heat-resistant steels up to +850°C; austenitic manganese steels together and with other steels; cryogenic plate and pipe steels together with cryogenic austenitic materials.

قطر الأسلاك

2.5 مم, 3.25 مم, 4 مم, 5 مم


لا توجد مراجعات بعد.

كن أول من يقيم “EL KADESIA E307-16”

لن يتم نشر عنوان بريدك الإلكتروني. الحقول الإلزامية مشار إليها بـ *