(Flaw Detections Ultrasonic Test) اختبار الموجات فوق الصوتية

Flaw Detections Ultrasonic Test
High frequency sound waves (frequency > 20000 HZ) also known as ultrasonic waves are introduced in a test object through a probe, these waves travel through the material on a predictable path. The waves are reflected at interfaces or other interruptions or discontinuity. The reflected waves are detected and then analysed for the possibility of any discontinuity in the test object.

Sound beam is emitted through a probe. The probe is made up of a piezoelectric material. Piezoelectric material has the ability of converting mechanical energy into electrical energy. It is reversible, hence an electrical energy can be converted into mechanical energy or sound energy. The probe receives electric signal from the Ultrasonic machine and converts it to sound beam, these sound beam travels into the test object and gets reflected at interfaces or discontinuity, the piezoelectric material (in probe) converts the reflected sound beam into electrical signal that can be displayed as visual signals on cathode ray tube (CRT) or liquid crystal display (LCD) screen of the machine. Three types of probes are generally used in industries;

• Normal Probe 
• TR probe
• Angle Probe
  
  In TR probe, two separate crystals are used to transmit and receive the sound energy in the same housing, whereas in Normal and Angle probes same crystal transmits as well as receives the sound beam. The normal probe emits sound energy at right angle to the transducer whereas, the angle probe can emit sound energy at an angle. Three types of angle probes are very popular among the industries, these are
  • 45⁰ angle probe
  • 60⁰ angle probe
  • 70⁰ angle probe

  Probe is also called as a “search unit” or “scanning device”. The probe is connected with the machine with the help of a connector (connecting wire). The machine has a screen (CRT or LCD) and adjustment/setting keys.

  Modes of propagation of sound energy:

  Sound waves are propagated, in a material, by the displacement of successive atoms in that material. These sound waves can be propagated in the material in many ways (modes). Three basic modes of propagation of sound energy in metals are being used in Ultrasonic test, these modes are:

  1. Longitudinal waves
  2. Transverse waves
  3. Surface waves

  Longitudinal waves: Longitudinal waves  are also called as straight or compressional waves. These waveforms are the simplest of all other waveforms. These waveforms exist when the motion of the particle is parallel to the direction of sound beam propagation. These waves have a relatively high velocity and a relatively short wavelength. These waveforms are very useful for detection of inclusions and lamellar-type discontinuities in base metal. Normal probe emits longitudinal waves.

  Transverse waves: Transverse waves  are also known as shear waves. These waveforms exist when the motion of particle is perpendicular to the direction of propagation of the sound beam. The velocity of shear waves is approximately half to that of longitudinal waves. The lower velocities provide greater sensitivity to small indications. These waves are more easily dispersed and cannot be propagated in a liquid medium (water). These waves are very useful for the detection of weld discontinuities.

  Shear waves are generated by transmitting longitudinal waves into the work piece at a predefined angle. The sensitivity of transverse waves is approximately double than that of longitudinal waves. Angle probe emits longitudinal waves.

  Surface waves: Surface waves is the third mode of propagation of sound energy in metal. It is also known as Rayleigh waves. These waves are propagated along the surface of the metal. Since these waves have very little movement below the surface of a metal hence, these waves have a very limited application for the examination of welded joints.

  Wave frequency: The sound wave frequency generally used for weld inspection is between 1 MHz to 6 MHz Higher frequency produce sharp and small sound beam which is very useful for thin-walled weldments. A 2.25 MHz frequency is often used in industries.

  Couplant: For transmission of ultrasonic waves into the test object, a liquid couplant is generally used. Most commonly used couplants are water, light oil, glycerine, and cellulose gum powder mixed with water. Work piece must be smooth and flat to allow proper coupling of the transducer with the test specimen.

  Watch a video now