URANOS welding machines – Product overview
The field of application of URANOS machines is determined by the welding process. Böhler Welding delivers the right welding machine for every process.
URANOS NX 3200 PME – MIG Process
Technical Specification
| General | |
| Welding processes | MIG/MAG – PULSED MIG/MAG – MMA – TIG DC Lift |
| Materials | Carbon steels – Stainless Steels – Duplex Steels – Aluminium – Copper – Hardfacing |
| Dimensions L x W x H | 620 x 240 x 460 mm |
| Weight | 27.6 kg |
| Power supply | |
| Voltage (50/60 Hz) | 3 x 400 / 230 V ± 15% |
| Maximum input power | 13.0 / 13.3 kVA |
| Maximum input current | 18.8 / 32.9 A |
| Power factor PF | 0.95 |
| Efficiency | 85 % |
| Slow blow line fuse | 20 / 30 A |
| Open circuit voltage | 75 Vdc |
| IP protection rate | IP23S |
| Insulation class | H |
| Power supply cable | 4 x 4 mm2 – 5 m |
| Welding | |
| Adjustment range | 3 – 320 A |
| Duty cycle
MIG / MAG – 40 °C |
50 % – 320 A 60 % – 310 A 100 % – 250 A |
| Duty cycle
MIG / MAG – 25 °C |
70 % – 320 A 100 % – 270 A |
| Ø Wire diameter (WF NX 4000) | 1.0 – 1.2 mm (opz .0.6 – 1.6) |
| Ø Flux cored wire (WF NX 4000) | 1.2 – 2.4 mm |
| Ø Aluminiumwire (WF NX 4000) | 0.8 – 1.6 mm |
| Wire speed (WF NX 4000) | 0.5 – 22 m / min |
| N° rolls (WF NX 4000) | 4 |
| Wire spool diameter (WF NX 3000 / WF NX 4000) | Ø 200 / 300mm |
| Welding programs | up to 600 |
| Welding job memory locations | up to 240 |
| U / D MIG / MAG torch compatible | YES |
| PUSH PULL torch compatible | YES |
| Remote Control compatible | YES |
| EN 1090 compatible | YES |
| WeldNet® compatible | YES |
Technicalities
- greenWave® inverter technology for high energy efficiency and perfect control over all welding phases
- High power at 100% of duty cycle
- Heavy duty and enviromental conditions, high service life
- CAN fieldbus digital communication protocol system (very high speed and high reliability digital communication)
- Software based controls can be upgraded as new features become available
- High temperature, shockproof, abrasion resistant plastic case
- Air flow ducting and fully encapsulated PC board to avoid dust contamination
- Linear controlled fan on demand
- Energy-saving inverter technology (built-in P.F.C. – power factor controller)
- Fully voestalpine Böhler Welding designed wire drive unit
- Full parameters control panel on wire feeder unit
- Full digital and user-friendly LCD graphic display control panel
- Welding parameters digital display
- Last job settings auto-storage at switch-off
- Totally programmable user interface
- Programmable welding operations safety limits
- Lock-unlock function key protected by password
- Control of several welding units over Ethernet
- Totally welding process remote programming and management by PC network
- Ideal for stick welding with multiple types of popular electrodes
- Built-in adjustable arc control features (hot start, arc force, antisticking)
- Synergic setting for optimal stick welding with all types of electrodes
- Reduced electromagnetic interference with lift start TIG welding
- 2 / 4 step operating mode
- Arc dynamic adjustment
- Perfect arc ignition (soft start – motor slope)
- Burn-back and droplet detachment correction
- Crater filler operating mode
- Wire speed (0,5 – 22,0 m / min), amperage and piece thickness adjustment
- Spot welding mode
- Intermittent welding mode
- MIG / MAG bilevel
- WU cooling unit compatible
- Controlled cooling operations
- Wire feeder unit (2/4 rolls drive)
- Ø 200/300 mm wire spool compatible
- User-defined welding program storage capability (64 free memory locations)
- Synergic operations from databank (60 pre-set programs)
- Digital MIG/MAG torch compatible
- Euro adaptor – U/D MIG/MAG torch compatible
- Push-pull torch device
- Remote control compatible
.
المراجعات
لا توجد مراجعات بعد.