, ,

XMT ® 425 Series – Miller Brand

.XMT 425 CC/CV requires optional control not available with XMT 425 VS model

350A of welding output at 60% duty cycle with superior low-end performance.

Power factor of .95 enables smaller fuses/breakers and primary wiring. Primary amperage draw at rated output is 25% less than the competition.

Ultra-tough, polycarbonate-blended cover for control panel protects front controls from damage

حدد أحد خيارات المنتج والكمية المطلوبة ثم ضف إلى قائمة مشترياتك , سوف يتم الرد عليكم بعرض سعر فى أقرب وقت.

(MIG (GMAW)/Pulsed MIG (GMAW-P , Stick (SMAW) ,TIG (GTAW) ,Flux Cored (FCAW) ,Air Carbon Arc Cutting and Gouging (CAC-A)
Heavy Industrial Applications
Construction ,Shipbuilding ,Railroad ,Truck/Trailer Manufacturing ,Fabrication ,Repair Shops ,Rental Fleets ,Power Generation Plants

Wind Tunnel Technology™

Wind Tunnel Technology™ protects electrical components and PC boards from contamination.


Fan-On-Demand™ cooling system operates only when needed, reducing noise, energy use and the amount of contaminants pulled through machine.


Lift-Arc™ allows TIG starting without the use of high-frequency. Starts the arc without contaminating the weld with tungsten.

Adaptive Hot Start™

Adaptive Hot Start™ increases the output amperage at the start of a weld if necessary, eliminating electrode sticking.

Input Power Requires 3- or 1-Phase Power 208 – 460 VAC, 50/60 Hz CE
Rated Output 10 – 38 V, 5 – 425 A
Weight Net: 80 lb (36.3 kg)
Ship: 89.1 lb (40.4 kg)

Input Power Three-Phase Single-Phase
Rated Out put at 60% Duty Cycle 350 A at 34 VDC 300 A at 32 VDC
Voltage Range in CV Mode 10–38 V 10–38 V
Amperage Range in CC Mode 5–425 A 5–425 A
Max. OpenCircuit Voltage 75 VDC 75 VDC
Dimensions H: 17 in (432 mm)
W: 12-1/2 in (318 mm)
D: 24 in (610 mm)
H: 17 in (432 mm)
W: 12-1/2 in (318 mm)
D: 24 in (610 mm)
Weight 80 lb (36.3 kg)



XMT 425 CC/CV, XMT 425 VS


لا توجد مراجعات بعد.

كن أول من يقيم “XMT ® 425 Series – Miller Brand”

لن يتم نشر عنوان بريدك الإلكتروني. الحقول الإلزامية مشار إليها بـ *