TECHNICAL DATA
GENERAL DATA
| Mains voltage | 230V |
|---|---|
| Mains frequency | 50-60Hz |
| Open-circuit voltage | 101 V |
| Degree of protection | IP23 |
| Welding current / Duty cycle [10min/40°C] | 180A / 40% |
|---|---|
| Welding current / Duty cycle [10min/40°C] | 160A / 60% |
| Welding current / Duty cycle [10min/40°C] | 120A / 100% |
FUNCTIONS
HOTSTART
To make the electrode easier to ignite, the current at the power source is increased for a fraction of a second during ignition. The HotStart function was specially developed for welding with rutile and Cel electrodes.
SOFTSTART
The SoftStart function ensures a stable arc at the start of welding and was specially developed for electrodes that are welded with a low welding current (basic electrodes).
TAC
With TAC, one spot is all it takes for tacking, because the pulsed arc sets the two weld pools in motion, making them jump together in next to no time, to make one single weld-pool. The TAC function is also very useful when welding light-gauge sheets without filler metal.
TIG COMFORT STOP
At the end of the welding operation, the welding current is switched off automatically if a specific change is made to the arc length. This prevents the arc being unnecessarily elongated when the TIG welding torch is lifted off the workpiece to end the welding process. This results in a better weld result in the area of the end-crater, as the gas shield is maintained.
.
FactSheet TransPocket 150/180 TIG
.
FactSheet TransPocket 150/180 TIG 
المراجعات
لا توجد مراجعات بعد.